Varnishing in flexography is a finishing process that is typically used on paper products such as prints and posters to give them a smooth finish.

Two steps must be completed in order to seal the paper, and then a bright light must shine over it to remove dust and other impurities. Vearnishing can be tricky, but there are a few key factors to remember if you want your prints to look their best.

First, make sure you apply the sealant correctly. Too much or too little will result in a sloppy finish. 

You should also adjust the shine level based on your product’s specific needs. Prints with too much shine will look artificial, while prints with too little shine will have faded images.

Finally, avoid varnish that contains solvents or chemicals; these will damage the print. 

Benefits of Varnishing in flexography:

With all of the new digital printing technologies becoming more and more popular, it is not surprising that flexography printing continues to be popular. 

The following are some of the benefits of using varnish when printing:

  1. Varnish protects your prints from water and other environmental elements.
  2. It keeps your prints vibrant and colorful for a longer period of time.
  3. Varnish prevents ink from turbulence when it is applied to paper by giving it a smooth finish.
  4. Varnish can also add a bit of brightness to prints, making them appear more lively and vibrant.

What is the purity and consistency of Varnish in Flexography?

The purity and consistency of varnish are two major concerns when using it in flexography.

Varnishes come in a wide variety of brands and types, and each may have different purity and consistency requirements.

Make sure the varnish meets your requirements before using it to ensure safety.Β Contact the manufacturer of your varnish for specific recommendations regarding purity and consistency.

Cleaning, Polishing and Maintenance:

Printing flexography presses with a varnish is one of the most important steps in getting prints that look great. 

You need to clean and polish the press regularly to keep the print heads and platen clean, as well as your varnish looking fresh.


What makes Varnish in Flexography: Different from a regular varnish?

Varnish is a type of paint that is used in flexography. It is different from a regular varnish in several ways. First, it is less viscous and has a higher tint.

This makes it perfect for creating high-quality prints on coated papers. Second, it is resistant to water and weathering.

This means that your prints will look good even after they are exposed to rain or sunlight. And finally, varnish in flexography can be transferred to other surfaces without damage.


Varnish is an amazing tool for flexography, but it can also be quite difficult to use correctly. 

In this article, I’ll go over the different ways you can use varnish in order to produce the best possible results. 

I hope that this guide will help you get started with varnishing and give you a better understanding of how it can help your artwork look even better.

You can buy best quality varnish for different application and varieties at Anyflexo Marketplace

Read Next about Corona Treatment in Flexo Printing