Printing on very large designs with corrugated Board | Anyflexo Tutorials

1 · 13 · 22
YouTube

By loading the video, you agree to YouTube's privacy policy.
Learn more

Load video

In this tutorial, we’ll show you a way how to print on very large designs with corrugated board !

This technique is by the way a very good examples of the possibilities you have with flexo printing if you have designs that are super large like for example three meter wide there is a way to double the format by matching two photomer polymer plates next to each other the work begins in the design and pre-press first make sure you reduce the number of elements affected by the plate joint especially no solid areas or texts should be divided by it. Then choose your backing material so that it reduces the overall weight and enables good repositioning ideal choice is always a PE foam with a smooth non-woven surface like Innovalux. There is no need to use any edge sealer whatsoever in the joint area remember we want to get a seamless look and then you take it to the press.

 

This video was created by Anyflexo.

Watch next video: How to mount post print flexo plates

 

Related Posts

Current Pharmaceutical Packaging Trends in Flexo Printing

Current Pharmaceutical Packaging Trends in Flexo Printing

Pharmaceutical packaging is a $124 billion global market that is growing at a CAGR of about 6% year over year. In contrast to other packaging segments, medicine will always be in high demand.  This was especially noticeable during the peak of the COVID-19...

Flexography Printing vs. Screen Printing: What’s the difference ?

Flexography Printing vs. Screen Printing: What’s the difference ?

Commercial printing uses a variety of technologies to print on various substrates, but flexographic printing and screen printing are two of the most popular. This post will look at the key differences between flexo printing and screen printing. Understanding these two...

Newsletter

Comments

0 Comments

Submit a Comment