What are Anilox Rollers and Anilox Sleeves?

Anilox rollers and anilox sleeves are used in short inking units such as flexographic printing, and sometimes also in offset printing or print varnishing. They transfer the minimum necessary, constant amount of ink to the flexographic printing plate during the printing process.

What does the minimum amount of ink required mean?

It results from the roughness of the printing stock and the fineness or resolution of the printing elements that are printed on it. In order to transfer all printing elements cleanly, a closed ink film is required on the surface of the printing substrate. The finer the printing elements, the lower the ink supply should be in order to print even the finest printing elements cleanly. With mixed printing forms, on the other hand, the ink supply must be so large that even solid areas print out homogeneously closed with the desired ink density.

What does the quantity of ink offered by an anilox roller depend on? The anilox roller engraving with the geometry of the cells or engraved structures is very important for this.

𝔰𝔯𝔠 APEX
GTT patented channel structure by Apex

For high-quality halftone flexo printing, two other forms of engraving have recently emerged in addition to the established 60Β° hexagonal engraving of cells. One is the engraving of an extended cell shape at an angle of 60Β°, and the other is the engraving of lines in the form of an open channel structure.

What do these new engraving forms offer?

They are intended to increase the resolution of the anilox rollers for finer clichΓ© screen ruling without losing any of the ink quantity offered. In addition to the possibility of using finer plate screen rulings, the ink transfer is more homogeneous due to the extended cells or the channel structure, i.e. the transferred ink film on the substrate is more closed and even. With the same volume specifications, this sometimes results in a higher dot gain, so the exact specification of the anilox rollers should always be discussed with the manufacturer of anilox rolls. Another advantage of the new engraving forms lies in their cleaning properties, which are easier to clean thanks to the larger cell openings.

What fineness of the Anilox rollers and thus screen ruling is required?

The fineness of an anilox roller indicates how many screen cells there are on a distance of one centimeter. When printing on plastic films, in label printing and flexible packaging, a ratio of 1∢6.5 to 1∢7.5 is generally assumed for the plate screen ruling to the screen roller ruling.

In practice, this means that if a 1% tonal value is to be printed with a 60Β° plate screen, the anilox roller must have a fineness of at least 400 L/cm for the 60Β° hexagonal engraving form. Its scoop volume is then 4 cm3/cm2 for non-absorbent substrates, for example.  For engravings of the extended cell form and channel structures, this ratio can increase to 1∢9.5 in order to print a halftone value of the same specification, i.e. 500 to 580 L/cm. It is not possible to translate volume specifications from one supplier to another, as each anilox roll manufacturer uses different measuring methods.

In corrugated board printing, with its absorbent substrates, the ratio is more like 1∢5. If, for example, a 42 cliché screen ruling is to be printed, anilox rollers with a ruling of 225 L/cm are used for process inks. Here, too, the screen ruling increases with engravings of the extended cell form and channel structures and increases to 340 L/cm, which also increases the ratio, in this example to 1∢8.

Read more about What exactly is the “Washboard effect”?