Anyflexo OÜ
Registered address: Lõõtsa tn 2b | Tallinn 11415 | Estonia
Managing directors: Florian von Heesen, Mario Busshoff
Office address: Anyflexo OÜ, Lõõtsa tn 2b, Tallinn 11415, Estonia
Business hours: 09:00~17:00
Telephone: +372 5593 7959
E-Mail: info@anyflexo.com
Value added tax Number: EE102405846
Liability for contents
As a service provider, we are responsible for our own content on these pages in accordance with the general laws. However, we are not obliged as a service provider to monitor transmitted or stored third-party information or to investigate circumstances that indicate illegal activity.
Obligations to remove or block the use of information in accordance with general laws remain unaffected by this. However, liability in this respect is only possible from the point in time at which a concrete infringement of the law becomes known. If we become aware of any such infringements, we will remove the relevant content immediately.
Liability for links
Our website contains links to external websites of third parties over whose content we have no influence. Therefore, we cannot assume any liability for these external contents. The respective provider or operator of the pages is always responsible for the content of the linked pages. The linked pages were checked for possible legal violations at the time of linking. Illegal contents were not recognisable at the time of linking.
However, permanent monitoring of the content of the linked pages is not reasonable without concrete indications of a legal violation. If we become aware of any infringements of the law, we will remove such links immediately.
Copyright
The contents and works on these pages created by the site operators are subject to Estonian copyright law. Duplication, processing, distribution, or any form of commercialisation of such material beyond the scope of the copyright law shall require the prior written consent of its respective author or creator. Downloads and copies of this site are only permitted for private, non-commercial use.
Insofar as the content on this site was not created by the operator, the copyrights of third parties are respected. In particular, third-party content is marked as such. Should you nevertheless become aware of a copyright infringement, please inform us accordingly. If we become aware of any infringements, we will remove such content immediately.
Acknowledgement of the Images in the Blogs:
Thumbnail | Attachment ID | Title | Attached to | Source |
---|---|---|---|---|
7146 | Flow Control Units3 | |||
7145 | Ink Pumps3 | |||
7144 | Central impression cylinder1 | |||
7123 | Flexo Plate Mounters1 | |||
7122 | bridge adapter for flexographic printing3 | |||
7121 | bridge adapter for flexographic printing1 | |||
7120 | Sheet Feeders3 | |||
7099 | Automatic Splicing Systems1 | |||
7097 | Tension Monitoring2 | |||
7096 | Register Control Mechanisms4 | |||
7075 | stack press 1 | |||
7073 | flexograpic central impression press3 | |||
7072 | web tension control systems for printing press6 | |||
6990 | image | |||
6728 | Plate-Elongation | AGFA | ||
6510 | Ink Build-Up | Anyflexo | ||
6500 | mechanical_print_damage | Stewart Butterfield | ||
6461 | ftd-plates-with-surface-screening | |||
6091 | electric_heating_roller | INOMETA | ||
6075 | double_adhesive_tape | IMC | ||
6035 | Dirty Print | Tooraj yousef | ||
6020 | Esko Software Resolution | Esko | ||
6012 | Moire Effect in Flexo Printing | Esko | ||
5956 | 020_Dot_Gain | Esko | ||
5920 | Adhesion_Tape_Test | Anyflexo | ||
5917 | Mottled_Print | No Chintz | ||
5909 | Plate Mounting Tape | IMC | ||
5890 | IN-MOUNT Sleeve | IMC | ||
5875 | Lithography | Arthur Rothstein | ||
5833 | Corrugated_Board | Solomon203 | ||
5816 | 014_Flexo_CMYK_Inks | ImpressAB | ||
5755 | 027_Compensation_for_Elongation | AGFA | ||
5742 | 100_Duct_Blades | Anyflexo | ||
5694 | Screenshot 2024-02-07 at 16.55.11 | |||
5693 | Screenshot 2024-02-07 at 16.55.29 | |||
5692 | Screenshot-2024-02-07-at-17.00.57 | |||
5691 | Screenshot 2024-02-07 at 16.54.40 | |||
5690 | Screenshot 2024-02-07 at 16.27.55 | |||
5689 | Screenshot 2024-02-07 at 16.28.23 | |||
5688 | Screenshot 2024-02-07 at 16.28.49 | |||
5671 | 021_Labels | AGFA | ||
5670 | 021_Flexible_Packaging | AGFA | ||
5669 | 021_Newspaper | AGFA | ||
5668 | 021_Corrugated | AGFA | ||
5667 | 021_Stochastic_Dots | AGFA | ||
5666 | 021_Asymmetric_Round_Dots_Reversed | AGFA | ||
5665 | 021_Asymmetric_Round_Dots | AGFA | ||
5664 | 021_Symmetric_Round_Dots | AGFA | ||
5663 | 021_Square_Dots | AGFA | ||
5638 | INOMETA_WinCore | INOMETA | ||
5637 | INOMETA_Wickelhülse | INOMETA | ||
5632 | INOMETA_Cylinder | INOMETA | ||
5199 | Printing_Machine_and_Cylinders | Ra Boe | ||
4723 | GTT Patented Channel Structure | APEX | ||
4636 | FC3D+ Flexoplate Camera Mesure System | Sibress | ||
4581 | 144_Green_Energy | JayHuangPhotography | ||
4519 | Profile_Male | GDJ | ||
4516 | Profile_Female | GDJ | ||
4129 | Checkout Anyflexo Marketplace | Anyflexo | ||
4043 | Gravurform-Stepped-Hex-003-freigegeben | Zecher | ||
4042 | Gravurform-60°-sechseckige-003-freigegeben | Zecher | ||
4029 | Printing machines for flexographic printing | Comexi | ||
3917 | 068_Dirty_Print | Jinterwas | ||
3898 | 124_Blister | Brett Jordan | ||
3896 | 033_Defective_Ink_Transfer | Anyflexo | ||
3890 | 041_Dot_Bridging | Anyflexo | ||
3885 | 095_Laser_Engraving | Roy Shearer | ||
3848 | Tools_on_Table | IMC | ||
3824 | 017_Universal_Flexo_Market | FTA | ||
3822 | 017_Linerboard | AGFA | ||
3820 | 017_Tag__Label | AGFA | ||
3819 | 017_Newspaper | AGFA | ||
3818 | 017_Milk_Carton | AGFA | ||
3817 | 017_Plastic_Bag | AGFA | ||
3816 | 017_Paper_Bag | AGFA | ||
3815 | 017_Envelope | AGFA | ||
3814 | 017_Rigid_Paper_Box | AGFA | ||
3813 | 017_Folding_Carton | AGFA | ||
3812 | 017_Gift_Wrap | AGFA | ||
3811 | 017_Flexible_Packaging | AGFA | ||
3810 | 017_Corrugated_Board | AGFA | ||
3800 | Ghosting Effect | Anyflexo | ||
3790 | Florian Von Heesen | Anyflexo | ||
3788 | Jing Li | Anyflexo | ||
3787 | Mario Busshoff | Anyflexo | ||
3780 | Anyflexo_Logo_R | Anyflexo | ||
3775 | Flexo Angles in RIP Configuration | Anyflexo | ||
3774 | Screen Ruling in RIP Configuration | Anyflexo | ||
3773 | Image Rastering | Anyflexo | ||
3560 | Banner_Flexopedia | Anyflexo | ||
3544 | 066_Repeat_Length | AGFA | ||
2875 | Narrow_Web_Press | Anyflexo | ||
2873 | Nonwoven Cushion Baking Foam for Corrugated Post-print | IMC | ||
2869 | 044_Imaged_Plate | Torben Wendland | ||
2868 | 143_Water_Drops_on_Surface | PxHere | ||
2865 | Printing-on-Very-Large-Designs | Anyflexo | ||
2864 | Setting_up_Large_Assemblies | IMC | ||
2859 | 056_Anilox_Roller_Condition_Shown_in_Software | Troika Systems | ||
2593 | 026_UVR_Photopolymer_Printing_Plate | Celshader | ||
2557 | 131_Foil_Embossing | Save the Date Projects | ||
2502 | 122_Screen_Printing | PxHere | ||
2491 | 121_Plate_Drying | Torben Wendland | ||
2484 | 119_Corrugated_Print | TVZ Design | ||
2468 | rip_solution_p2_04 | Esko | ||
2467 | rip_solution_p2_03 | Esko | ||
2466 | rip_solution_p2_00 | PackZ | ||
2465 | rip_solution_p2_02 | Esko | ||
2404 | 116_FlexoPrint_Application | FlexoPrint | ||
2403 | 116_Plate_Screen_Dot | FlexoPrint | ||
2402 | 116_Plate_Screen_Anilox | FlexoPrint | ||
2401 | 116_Distortion | FlexoPrint | ||
2400 | 116_Roll_Length | FlexoPrint | ||
2399 | 116_Number_of_Teeth | FlexoPrint | ||
2398 | 116_Ink_Consumption | FlexoPrint | ||
2397 | 116_Menu | FlexoPrint | ||
2393 | 115_Dark_Finish | Di | ||
2390 | 115_ECI2002_Chart | Kiran Deshpande | ||
2389 | 115_Various_Range_of_Colours | Ferlixwangg | ||
2388 | 115_CIELAB_colour_space | Nilsjohan | ||
2387 | 115_Colour_Management | Anyflexo | ||
2362 | 112_Musee_des_Arts_et_Metiers_-_Presse_typographique_rotative_de_Marinoni | Frédéric BISSON | ||
2357 | 114_Types_of_Anilox | ECTran71 | ||
2338 | Anilox_Roll | twintiger007 | ||
2314 | 109_Sustainable_Packaging_Trend | Meanwell Packaging | ||
2311 | 108_Helpful_Sustainable_Package | Meanwell Packaging | ||
2256 | 011_Coating | Pixabay | ||
2243 | 100_Blade_Edges | Anyflexo | ||
2229 | 087_Flexible_Packaging_Material | Asurnipal | ||
2213 | Druck | Sandra Kaiser | ||
2201 | Plate_Making | Newberry Library | ||
2198 | Flexible_Package | Asurnipal | ||
2188 | 092_Humidity | Marco Verch | ||
2182 | 094_Paint_Buckets | PxHere | ||
2179 | 085_Foiling | Bgilliam90 | ||
2154 | 082_Lamination | Dale Simonson | ||
2150 | 081_Rotary_Die_Cutting | Trufitsteelruledies | ||
2140 | 076_Corona_Treatment | Enercon | ||
2128 | Elastomer_Ball | Gaurav Dhwaj Khadka | ||
2088 | 071_Thermal_Processed_Plate | Torben Wendland | ||
2087 | 071_Solvent_Processed_Plate | Torben Wendland | ||
2068 | 070_Skip_Out | Anyflexo | ||
2065 | 069_Feathering | John Bosley | ||
2062 | Dirty_Marks | Anyflexo | ||
2059 | 067_Doughnut_Effect | Rachel Sandquist | ||
2051 | 065_Bleed_and_Smudge | Max Stanworth | ||
2045 | 063_Transverse_Stripes | Xue Chen | ||
2030 | Flexo plate mounting tape conversion | Anyflexo | ||
2024 | 062_Longitude_Stripes | Xue Chen | ||
2006 | 060_Minor_Defects | Inkman | ||
1871 | 057_Benefits_of_Anilox_Inspection | Troika Systems | ||
1867 | 055_Troika_AniCAM_HD | Troika Systems | ||
1844 | 049_Misregistration_CMYK | Jyon | ||
1843 | 049_Misregistration__Trapping | Xorx | ||
1838 | 048_Pinhole | Anyflexo | ||
1667 | Colour_Strength | Magica | ||
1658 | 043_Exposure_with_Tubes | Torben Wendland | ||
1657 | 043_Exposure_with_LED_Bar | Torben Wendland | ||
1648 | 044_Laser_Imaging | Torben Wendland | ||
1636 | 034_Back_Exposure_Staircase_Shape | Torben Wendland | ||
1598 | 039_Deformed_Dots | Magica | ||
1596 | 038_Ink_Blocking | Magica | ||
1555 | Laser Cleaning 22 | Troika Systems | ||
1554 | Laser Cleaning 21 | Troika Systems | ||
1553 | Laser Cleaning 20 | Troika Systems | ||
1552 | Laser Cleaning 19 | Troika Systems | ||
1551 | Laser Cleaning 18 | Troika Systems | ||
1549 | Laser Cleaning 17 | Troika Systems | ||
1548 | Laser Cleaning 16 | Troika Systems | ||
1547 | Laser Cleaning 15 | Troika Systems | ||
1546 | Laser Cleaning 14 | Troika Systems | ||
1545 | Laser Cleaning 13 | Troika Systems | ||
1544 | Laser Cleaning 12 | Troika Systems | ||
1543 | Laser Cleaning 11 | Troika Systems | ||
1542 | Laser Cleaning 10 | Troika Systems | ||
1541 | Laser Cleaning 09 | Troika Systems | ||
1540 | Laser Cleaning 08 | Troika Systems | ||
1539 | Laser Cleaning 07 | Troika Systems | ||
1538 | Laser Cleaning 06 | Troika Systems | ||
1530 | Laser Cleaning 05 | Troika Systems | ||
1529 | Laser Cleaning 04 | Troika Systems | ||
1528 | Laser Cleaning 03 | Troika Systems | ||
1527 | Laser Cleaning 02 | Troika Systems | ||
1524 | Laser Cleaning 01 | Troika Systems | ||
1509 | 033_Dirty_Transition | Anyflexo | ||
1508 | 033_Bleeding | Anyflexo | ||
1507 | 033_Proper_Ink_Transfer | Anyflexo | ||
1506 | 033_Filling_In | Anyflexo | ||
1505 | 033_Ink_Splashing_Regional | Anyflexo | ||
1504 | 033_Unsharp_Printing | Anyflexo | ||
1503 | 033_Cupping_Issue | Anyflexo | ||
1502 | 033_Registration_Issue | Anyflexo | ||
1501 | 033_Ink_Splashing_Overall | Anyflexo | ||
1500 | 033_Blocking | Mary Anne Enriquez | ||
1469 | Digital_Plate_Making | Anyflexo | ||
1467 | Techkon Densitometre | Techkon | ||
1466 | Laser-Ablated Mask | Anyflexo | ||
1465 | Registration Mark | Anyflexo | ||
1463 | 035_Onyx_RIP_Software | Onyx | ||
1462 | 035_Halftone_Example | Wapcaplet | ||
1460 | 035_Die_Cutting | AGFA | ||
1453 | 034_Back_Exposure_Floor_Shape | Torben Wendland | ||
1447 | End_Seals | Anyflexo | ||
1445 | 032_Ink_Laydown | Anyflexo | ||
1444 | 032_Pin_Holing | Anyflexo | ||
1443 | 032_Insufficient_Solid_Ink_Density | Anyflexo | ||
1442 | 032_Dirty_Plate_Surface | Anyflexo | ||
1441 | 032_Insufficient_Plate_Hardness | Anyflexo | ||
1439 | 032_Slurring | Anyflexo | ||
1438 | 032_Dirty_Print | Anyflexo | ||
1432 | 032_Curling | Anyflexo | ||
1427 | 031_Crack | Anyflexo | ||
1424 | 031_Insufficient | Anyflexo | ||
1425 | 031_Sufficient | Anyflexo | ||
1423 | 031_Missing_Dots | Anyflexo | ||
1422 | 031_Unstable_Dots | Anyflexo | ||
1421 | 031_Ablation | Anyflexo | ||
1420 | 031_Moire_02 | Anyflexo | ||
1419 | 031_Moire_01 | Anyflexo | ||
1390 | 029_Stack_Machine | RawPixel | ||
1323 | 024_Pre_Press_Procedure | AGFA | ||
1321 | 024_Density | AGFA | ||
1320 | 024_Resolution | AGFA | ||
1319 | 024_Dot_Shape | AGFA | ||
1318 | 024_Uniformity | AGFA | ||
1317 | 024_Calibration | AGFA | ||
1316 | 024_Film | AGFA | ||
1315 | 024_Size | AGFA | ||
1314 | 024_Accuracy | AGFA | ||
1304 | Choose the Right Plate-Mounting Tapes | Anyflexo | ||
1303 | 026_Mounting_Tape | IMC | ||
1301 | 026_Printing_Sleeve | SWG | ||
1300 | 026_Printing_Ink | BostonIndustri | ||
1298 | 026_Plate_Mounting | Flexo.a | ||
1293 | 027_Wind_Direction | AGFA | ||
1292 | 027_Bar_Coding | AGFA | ||
1291 | 027_Dot_Gain | AGFA | ||
1290 | 027_Ink_and_Impression_Levels | AGFA | ||
1289 | Laser_Cured_Printing_Plate | Anyflexo | ||
1288 | 027_External_Register | AGFA | ||
1287 | 027_Substrate | AGFA | ||
1286 | 027_Ink_Laydown | AGFA | ||
1285 | 027_Colour_Match | AGFA | ||
1284 | 027_Density | AGFA | ||
1283 | 027_Registration | AGFA | ||
1282 | 027_Type | AGFA | ||
1279 | 028_Problem_and_Solution | PxHere | ||
1256 | Highlight area of printing plate | Sandra Kaiser | ||
1245 | 023_Test_Target | AGFA | ||
1238 | 019_Cleaning | Bearfotos | ||
1220 | colour analysis and measurement in flexo printing | Sandra Kaiser | ||
1212 | 021_Gradation_of_Flexo | AGFA | ||
1210 | 021_Highlight | AGFA | ||
1182 | 020_Dot_Gain_Illustration | Esko | ||
1180 | 020_Substrate | AGFA | ||
1179 | 020_Viscosity | AGFA | ||
1178 | 020_Durometer | AGFA | ||
1177 | 020_Pressure | AGFA | ||
1174 | 020_Esko_Printed | Esko | ||
1173 | 020_Esko_Original | Esko | ||
1163 | 018_Distorted_Plate | AGFA | ||
1162 | 018_Inline_Press | AGFA | ||
1161 | 018_CI_Press | AGFA | ||
1159 | 018_Two_Rolls_with_Doctor_Blade | AGFA | ||
1160 | 018_Dual_Doctor_Chamber | AGFA | ||
1158 | 018_Flexographic_Printing | AFGA | ||
1114 | 003_Flexo_Printing_with_Ink_Chamber | ECTran71 | ||
1113 | 003_Flexographic_printing_diagram | ECTran71 | ||
1107 | 142_Wide_Web_Press | Ukjent | ||
1076 | 014_flexo_ink_market_statics | Anyflexo | ||
1069 | inline printing press | Gallus Ferd. Rüesch AG | ||
1059 | 013_Bar_Code | Anyflexo | ||
1056 | 013_Trap_01 | Anyflexo | ||
1055 | 013_Trap_02 | Anyflexo | ||
1054 | 013_Gradation | Anyflexo | ||
1053 | 013_Vignette | Anyflexo | ||
1028 | 011_Flower_Glass_Green_Red | PxHere | ||
1021 | 012_Flexo_vs_Gravure | nattanan | ||
1016 | 010_CMYK_Inline_Press | PxHere | ||
1011 | 010_Industrial_Inline_Press | PxHere | ||
963 | 009_CI_Drum_Machine | Soma Engineering | ||
962 | 009_CI_Drum | Anyflexo | ||
810 | flexographic printing identification flexo rosette | Sandra Kaiser | ||
809 | Squeezed elements, positive and negative | Sandra Kaiser | ||
687 | Innovaflexo-label-press-machine | IMC | ||
506 | Halftone dots in Printing Plates | DFTA | ||
467 | 004_Eco_Friendly_Text_on_Price_Tag | Marco Verch | ||
392 | Washboard effect in corrugated printing | Sandra Kaiser | ||
354 | 001_HK_Jockey_Club_Creative_Arts_Centre_JCCAC_Old_Machine_Printers | SKMCAC | ||
117 | Anyflexo-Color | Anyflexo | ||
110 | Anyflexo-Color | Anyflexo | ||
108 | Anyflexo-Color | Anyflexo | ||
106 | Anyflexo Square Logo | Anyflexo | ||
25 | divi-logo-white-e1610502870685 | Divi |